Wilo-Flumen OPTI-TR 50 … 120
Operationally reliable mixing, non-susceptible to clogging, of various kinds of wastewater and sludge in wastewater treatment.
-
Description
The highly efficient Wilo-Flumen OPTI-TR 50-3/60-3/80-3 series ensure operationally reliable continuous operation or control mode that is non-susceptible to clogging when mixing various kinds of wastewater and sludge in wastewater and sludge treatment.
-
Advantages
- Reliable continuous operation thanks to propellers that are non-susceptible to clogging and largely dimensioned gear bearings
- High operational reliability by using stainless steel investment-cast propellers
- Reduction of energy costs due to best thrust to power ratio possible thanks to optimised hydraulics with minimum cavitation tendency
- Customer-specific configuration taking into account the system parameters
- Simple adaptation to the load cases due to operation with a frequency converter
- Simple installation and removal, even when the basins are filled, thanks to an extensive accessories portfolio
- Simple replacement due to adaptation to existing installations
-
Technical Features
Design
Medium-speed submersible mixer with single-stage planetary gear, in continuous or intermittent operation.
Application
- Stormwater retention tanks
- Activated sludge tank
- Sludge treatment
- Mixing and buffer basins
- Special applications
Liquid
For suspension and homogenisation in commercial areas of:
- Process sewage
- Sewage containing faeces
- Wastewater (with small amounts of sand and gravel)
Equipment/function
- Thermal motor monitoring with bimetallic strip
- Single-stage planetary gear
- 3-chamber system
- Operation with frequency converter possible
Typekey
Example: Wilo-Flumen OPTI-TR 50-3.23-6/16Ex S17 Flumen Submersible mixer, horizontal OPTI-TR Series: Mixer with standard asynchronous motor 50 x10 = nominal propeller diameter in mm 3 Model 23 x10 = nominal propeller speed in rpm 6 Number of poles 16 x10 = stator pack length in mm Ex Ex-rated S17 Propeller code for special propeller (omitted for standard propeller) Technical Data
- Mains connection: 3~400 V, 50 Hz
- Fluid temperature: 3 … 40 °C (37 … 104 °F)
- Submerged operating mode: S1
- Protection class: IP68
- Insulation class: H
- Max. switching frequency: 15/h
- Max. immersion depth: 20 m (66 ft)
Materials
- Housing: EN-GJL-250 (ASTM A48 Class 35/40B)
- Seal:
- Motor/sealing chamber: FPM (FKM)
- Gasket/gear chamber: SiC/SiC
- Gear chamber/pre-chamber: FPM (FKM)
- Fluid side: SiC/SiC
- Propeller:
- OPTI-TR 50-3/60-3/80-3: 1.4408 (ASTM A 351)
- OPTI-TR 90-2: PUR/GFK (PUR/GFRP)
- OPTI-TR 120-1: PA6G
Construction
Propeller
2- or 3-bladed propeller made of solid or composite material. Nominal propeller diameter of 500 mm to 1200 mm with clogging-free propeller geometry.
Motor
Surface-cooled submersible motor in three-phase current design with permanently lubricated und large-size rolling bearings. The motor winding is equipped with temperature monitoring. The motor heat is given off directly to the surrounding fluid via the motor housing. The connection cable is designed for heavy mechanical loads, sealed water pressure-tight against the fluid and is sealed longitudinally watertight. The connection cable has bare cable ends and is 10 m (33 ft) long as standard.
Seal
The system is sealed by a 3-chamber system:
- Pre-chamberThe high-volume pre-chamber has been filled with gear oil to absorb any leakage at the seal on the fluid side. A mechanical seal is used as the seal on the fluid side. A rotary shaft seal seals towards the gear chamber.
- Gear chamberThe gear chamber has been filled with gear oil to guarantee continuous lubrication of the planetary gear and the gear bearings. A mechanical seal seals towards the sealing chamber.
- Sealing chamberThe high-volume sealing chamber is filled with white oil and absorbs any leakage from the gear chamber. A rotary shaft seal seals towards the motor.
Gear
Single-stage planetary gear with exchangeable transmission. Gear bearings have been dimensioned large to absorb resulting stirring forces and not transfer these to the motor bearing.
Option
- Thermal motor monitoring as temperature controller and temperature limiter
- Thermal motor monitoring with PTC sensor
- Fluid temperatures up to 60 °C (140 °F), depending on the motor type and motor capacity
- Pre-chamber monitoring
- Ex-rated in accordance with ATEX, FM and IEC-Ex
- Ceram coating for housing parts made of grey cast iron
Accessories
- Mounting bracket for wall and floor fixation
- Lowering device
- Auxiliary lifting device
- Cable bollard to secure the hoist cable
- Adjustable stop
- Additional rope anchoring
- Fixation sets with anchor bolts
-
Downloads
Click Below to Download:
Wilo-Flumen OPTI-TR 20-1 … 40-1, Wilo-Flumen EXCEL-TRE 20 … 40, Wilo-Flumen OPTI-TR 50-3 … 120-1, Wilo-Flumen EXCEL-TRE 50-3 … 90-2, Wilo-EMU TR 50-2 … 120-1, Wilo-EMU TRE 50-2 … 90-2, Wilo-EMU TR/TRE 212 … 326-3
Efficiency for your Treatment Processes
Group Statement REACH
Wilo-Flumen OPTI-TR 50-3 … 120-1, Wilo-Flumen EXCEL-TRE 50-3 … 90-2
