Sensor-Max II variable speed freshwater pump

Enquire About This Product

  • Description

    The Sensor-Max II is our most sophisticated freshwater delivery solution featuring variable speed technology. The Sensor-Max II incorporates our high performance five chamber design with advanced pressure sensor and variable speed programming that automatically adjusts the motor speed to deliver the right flow and pressure the water system requires. The result is a truly exceptional experience with your onboard water system delivering consistent pressure and flow that you just may forget you’re at sea.

    Sensor-Max II’s variable speed technology eliminates the need for an accumulator tank, saving valuable installation time and space in crowded plumbing compartments. With a high flow capacity of 5 GPM (19 LPM), the Sensor-Max II can supply water for system sizes of up to five outlets, but when less demand or single faucet use is needed, the pump will automatically slow down the motor, resulting in whisper quiet operation and conserved power.

    Take advantage of all the benefits that the Sensor-Max II has to offer your water pressure system and enjoy a truly exceptional onboard experience.

    What Our Customers Have to Say about the Sensor-Max II

    “I like the lower (quieter) tone and smooth ramp up and ramp down when using the pump.”

    Mike, Massachusetts, USA

    “The Sensor-Max II helped with not having to coordinate water usage. Being able to run more than one outlet at a time is great.” 

    Justin, New Mexico, USA

    “I appreciate the ability to operate at low rpm with low noise when low volume flow is needed. Being mounted on a bulkhead with a stateroom on the opposite side makes quiet operation appreciated.” [After a spring cruise] “Both (Sensor-Max II pumps) worked flawlessly (as they have prior to this trip) and provided a superior potable water experience to any pumps I’ve ever had! (35+ years of cruising boats.)”

    Brad, Florida, USA

    Sensor-Max II testimonials were received via feedback surveys from customer product testers who received the product for free. They are individual experiences, reflecting real life experiences of those who tested the product. Individual results may vary. Testimonials are not necessarily representative of what anyone else using our product may experience.

  • Advantages


    Product Features

    • Quiet operation with no water hammer
    • Consistent pressure and smooth, steady flow
    • Eliminates need for accumulator tank
    • High flow capacity, supplies up to five outlets
    • Conserves power by adjusting motor speed as needed
    • Robust co-molded diaphragm technology and cast aluminum lower housing for long life even at high pressures
  • Suitability

    Diaphragm Pumps

  • Technical Features

    Specifications Sensor-Max II
    Motor design Brushed, permanent magnet TENV
    Pumphead upper housing material Glass fiber reinforced polypropylene
    Diaphragm Santoprene
    Check valves EPDM
    Max inlet pressure 30 PSI (2.1 Bar)
    Fluid temperature range 32°F – 140°F (0°C – 60°C)
    Dry self-priming capability 7ft min (2.1m min)
    Certifications Pending
    Ingress protection Pending
    Open Flow 5 GPM (19 LPM)
    Voltage Options 12 VDC
    Max Running Pressure 40 PSI (2.8 bar)
    Quick Connect Strainer 90 degree 40 mesh
    Quick Connect Straight Hosebarb Fittings 2 x 1/2″ (13mm); 2x 3/4″ (19mm)
    Quick Connect Elbow Hosebarb Fittings 1 x 1/2″ (13mm); 1x 3/4″ (19mm)
  • Downloads

    Click below to download

    User Guide – Sensor-Max II

Why Jabsco?

Icon Tick

Reliable

Icon Tick

Energy Efficient

Icon Tick

Durability

Icon Tick

Versatility

Icon Tick

Ease of Maintenance

Icon Tick

Innovation