Jabsco – 17800 & 17820 Series

Xylem’s Jabsco 17800 Series and 17820 Series are engineered with heavy-duty flexible impeller pumps and are ideal for changing oil on recreational boats.

17800 Series

The Jabsco 17800 Series is ideal for service center technicians changing oil on board any boat. This system uses the vessel’s power supply to operate the heavy-duty flexible impeller pump while featuring a reversing switch that allows oil to pump in either direction.

17820 Series

The Jabsco 17820 Series is designed to be installed in a vessel’s engine room with its manifold and valves permanently plumbed to the vessel’s engine oil pan or transmission sump.

The manifold is factory fitted with three ball valves to service three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs.

The system can be used to remove old oil from an engine or transmission then reversed, with the built-in reversing switch, to pump fresh fluid into the engine or transmission. Each connection is controlled by a dedicated full flow ball valve.

The system’s cover provides an attractive appearance, fully shrouding the entire pump and manifold system. It also provides added protection against accidental draining of an engine’s oil supply because the valve cover protects the factory-supplied valves from being accidentally bumped open. As an added benefit, at the end of an oil change the cover will not close unless the factory supplied valves are in the fully closed position.