Pulsar Dry by DAB is a 5-inch submersible or surface multi stage impeller monoblock pump for clean water to increase water pressure, gardening and irrigation activities in residential building services. The aspiration takes place through a watertight fitting placed in the lower part. The pump can increase water pressure by taking it from rainwater collection tanks or cisterns and is also able to work on the surface. The Pulsar Dry motor is located above the hydraulic part and is cooled by the pumped liquid. The construction with robust components allows the pump to run dry for short periods. Impellers and diffusers are in technopolymer. The single-phase version includes the 15-metre power cable with power plug, the thermo-amperometric protection and the starting capacitor. The single-phase version is also available without the capacitor, this version must be combined with a control panel supplied as an accessory. Protection by the user in the three-phase version.
Flow rate maximum: From 0,9 m3/h to 7,2 m3/h
Head: up to 88 m
Maximum immersion depth: 20 m
Type of pumped liquid: Clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral
Sand quantity: 50 g/m3
Liquid temperature range: From 0°C to +40°C
Thread: 1″ 1/4 GAS
Pump maximum diameter: 138 mm
Impeller/s material: Technopolymer
Maximum number of starts: 20/h
Protection class: IP 68
Motor insulation class: F
Single phase power input: 230 V 50 Hz
Three phase power input: 3×230 V 50 Hz / 3×400 V 50 Hz
Power cable (m) and plug: 15 m H07RN-F with power plug
Possible type of installation: Fixed or removable, in vertical position
Special versions on request: Different voltages and frequencies, different cable length