

Wilo-Rexa UNI
For the sewage disposal of small commercially used buildings.
-
Description
The Wilo-Rexa UNI is suitable as an entry level model for smaller commercial buildings for sewage disposal (according to EN 12050-1). For this purpose, the pump can be used in a wide variety of applications, whether portable or in the pump chamber as a Wilo system solution. The new vortex hydraulics with corrosion-resistant composite and a smooth surface provide high reliability and allow the pump to be used universally with various fluids. Installation is very easy due to the low weight, the capacitor integrated in the single-phase motor and the fixings integrated in the flange. Maintenance is very easy thanks to direct access to the most important components. Due to double gaskets and the large sealing chamber, maintenance intervals can be increased. Wilo-Rexa UNI can be controlled via Wilo-Control switchgears and integrated into existing building management systems. With the Wilo-Rexa UNI, Wilo again proves its innovative leadership and underscores its system expertise by integrating single pumps, pump chambers and controls into higher-level systems.
-
Advantages
- Excellent reliability due to corrosion-free hydraulics for universal application and various fluids
- Easy installation thanks to its light weight, integrated capacitor at the single-phase motor and flange with integrated fixation
- Optimum efficiency and operational safety thanks to its vortex hydraulics and smooth surfaces
- Quick maintenance facilitated by direct access to the sealing chamber and pump housing
- Long maintenance interval thanks to its double seal and a high volume sealing chamber
-
Technical Features
Design
Submersible pump for stationary and portable wet installation in intermittent operation.
Liquid
For pumping in commercial areas of:
- Sewage containing faeces
- Wastewater (with small amounts of sand and gravel)
- Wastewater, slightly acidic with a pH value > 4.5
- The Rexa UNI submersible pumps … B/ and Rexa UNI … K/ are additionally suitable for pumping of:
- Lake- and seawater NaCl content (common salt): max. 30 g/l up to 20 °C
- Swimming pool water, max. chloride content: 400 mg/l
- Wastewater, slightly acidic with a pH value of > 3.5
Sewage pumping according to (DIN) EN 12050
The pumps meet the requirements of EN 12050-1.
Equipment/function
- Thermal motor monitoring with bimetallic strip
- Single-phase AC motor with self-switching thermal motor monitoring
- Single-phase AC motor with integrated capacitor
- Three-phase AC motor with motor protection plug (version P and A)
- Attached float switch (version A)
Typekey
Example: Wilo-Rexa UNI V05B/T06-540/P Rexa Submersible sewage pump UNI Series V Vortex impeller 05 Nominal diameter of pressure connection - 05 = DN 50
- 06 = DN 50/65
B Version: - None = standard version
- B = V4A version
- K = version in V4A and with cooling shroud
T Mains connection version: - M = 1~
- T = 3~
06 /10 = rated power P in kW 5 Mains connection frequency: 5 = 50 Hz, 6 = 60 Hz 40 Rated voltage code A Additional electrical equipment: - Without = with bare cable end
- P = with plug
- A = with float switch and plug
Technical Data
- Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Immersed operating mode: S1
- Non-immersed operating mode:
- Rexa UNI …: S2-15 min; S3 10%
- Rexa UNI … B/ …:S2-15 min; S3 10%
- Rexa UNI … K/ …:S1
- Protection class: IP68
- Insulation class: F
- Fluid temperature: 3 … 40 °C (37 … 104 °F)
- Fluid temperature, max.: 60 °C (140 °F) for 3 min
Materials
- Wilo-Rexa UNI V05 …
- Hydraulics housing: PP-GF30
- Impeller: PP-GF30
- Motor housing: 1.4301 (AISI 304)
- Cooling shroud: −
- Shaft end: 1.4401 (AISI 316)
- Seal on the pump side: SiC/SiC
- Seal on the motor side: C/Cr
- Static seal: NBR (nitrile)
Wilo-Rexa UNI V05 … B/ …
- Hydraulics housing: PP-GF30
- Impeller: PP-GF30
- Motor housing: 1.4401 (AISI 316)
- Cooling shroud: −
- Shaft end: 1.4401 (AISI 316)
- Seal on the pump side: SiC/SiC
- Seal on the motor side: C/Cr
- Static seal: NBR (nitrile)
Wilo-Rexa UNI V06 …
- Hydraulics housing: PP-GF30
- Impeller: PP-GF30
- Motor housing: 1.4301 (AISI 304)
- Cooling shroud: −
- Shaft end: 1.4401 (AISI 316)
- Seal on the pump side: SiC/SiC
- Seal on the motor side: C/Cr
- Static seal: NBR (nitrile)
Wilo-Rexa UNI V06 … B/ …
- Hydraulics housing: PP-GF30
- Impeller: PP-GF30
- Motor housing: 1.4401 (AISI 316)
- Cooling shroud: −
- Shaft end: 1.4401 (AISI 316)
- Seal on the pump side: SiC/SiC
- Seal on the motor side: C/Cr
- Static seal: NBR (nitrile)
Wilo-Rexa UNI V06 … K/ …
- Hydraulics housing: PP-GF30
- Impeller: PP-GF30
- Motor housing: 1.4401 (AISI 316)
- Cooling jacket: 1.4401 (AISI 316)
- Shaft end: 1.4401 (AISI 316)
- Seal on the pump side: SiC/SiC
- Seal on the motor side: C/Cr
- Static seal: NBR (nitrile)
Construction
Rexa UNI V … /M …/P
Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with fitted shockproof plug.
Rexa UNI V … /M …/A and Rexa UNI V … B/M …/A
Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with float switch and fitted shockproof plug.
Rexa UNI V … K/M …/A
Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. 1~ motor (jacket cooling) with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing. Motor housing and cooling shroud made of stainless steel. Detachable connection cable with float switch and fitted shockproof plug.
Rexa UNI V … /T …/A
Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 3~ motor with thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with CEE plug. Float switch and thermal motor monitoring connected to the CEE plug.
Rexa UNI V … /T … and Rexa UNI V … B/T …
Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 3~ motor with thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with bare cable ends.
Rexa UNI V … K/T …
Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. 3~ motor (jacket cooling) with thermal motor monitoring. Oil-filled sealing chamber with double sealing. Motor housing and cooling shroud made of stainless steel. Detachable connection cable with bare cable ends.
Accessories
- Connection cable with fixed cable lengths:
- 1~ motor: up to max. 30 m (98 ft).
- 3~ motor: up to max. 50 m (164 ft).
- Suspension unit for wet well installation
- Level control devices
- Fixation accessories and chains
- Switchgear, relays and plugs
- Downloads
Why Wilo Pumps…
Self-Priming
Convenient
Highly-Efficient
Noise-Free
Diversity
Optimised Design
What Trebles Customers Think
Job delivered and commissioned at the height of the pandemic with no changes to the excellent service we always receive.
Carl Berridge – MD, Powergas
The team at Trebles were great. I really can’t praise them enough.
Richard Beard – Club Secretary, Belvedere Park FC
Not many providers would be able to fully breakdown & rebuild a booster on site
Clive Bradley – Senior Contracts Engineer, JS Wright
We relied on Trebles expertise to ensure the right products were sourced for our project.
Matthew Gidley – Senior Contracts Engineer, JS Wright
Top workmanship and a professional attitude from a supportive team
Richard Leek – Project Manager, Marshdale
Excellent customer service again! You genuinely make my life so much easier
Anthony Gooding – Director, HSP
Excellent service and a company I would recommend to anyone in future
Jason Goldsmith – Supervisor, Interserve
Engineers were very professional with an excellent knowledge of their trade
Martin Deakin – Gas Surveyor, Bromford
We’re writing to express our sincere thanks to all who help ensure our hospitals are able to run smoothly
Richard Hill – Estates Manager, London Road Community Hospital
Job delivered and commissioned at the height of the pandemic with no changes to the excellent service we always receive.
Carl Berridge – MD, Powergas
The team at Trebles were great. I really can’t praise them enough.
Richard Beard – Club Secretary, Belvedere Park FC
Not many providers would be able to fully breakdown & rebuild a booster on site
Clive Bradley – Senior Contracts Engineer, JS Wright
We relied on Trebles expertise to ensure the right products were sourced for our project.
Matthew Gidley – Senior Contracts Engineer, JS Wright
Top workmanship and a professional attitude from a supportive team
Richard Leek – Project Manager, Marshdale
Excellent customer service again! You genuinely make my life so much easier
Anthony Gooding – Director, HSP
Excellent service and a company I would recommend to anyone in future
Jason Goldsmith – Supervisor, Interserve
Engineers were very professional with an excellent knowledge of their trade
Martin Deakin – Gas Surveyor, Bromford
We’re writing to express our sincere thanks to all who help ensure our hospitals are able to run smoothly
Richard Hill – Estates Manager, London Road Community Hospital
Job delivered and commissioned at the height of the pandemic with no changes to the excellent service we always receive.
Carl Berridge – MD, Powergas
The team at Trebles were great. I really can’t praise them enough.
Richard Beard – Club Secretary, Belvedere Park FC
Not many providers would be able to fully breakdown & rebuild a booster on site
Clive Bradley – Senior Contracts Engineer, JS Wright