-
Description
Self-priming water-supply units.
-
Advantages
- Ideal for use in outside areas (hobby, garden) thanks to durable construction; continuously good performance thanks to corrosion-free materials
- Completely preassembled system, simple installation and maintenance through Plug&Pump system and 360° rotatable display, which means that it can be read from any direction
- Electronic pump control
- High operational reliability thanks to dry-running protection
-
Technical Features
Design
Self-priming water-supply units
Application
- Water pumping from wells and rainwater storage tanks
- Filling, pumping empty, transferring by pumping, irrigation and sprinkling
- As emergency pump for overflows
Equipment/function
For pumping water and rainwater from wells and tanks for:
-
- Sprinkling
- Irrigation and spraying
Equipment/function
- Directly flanged motor
- Connection cable with plug
- Thermal motor protection switch
- Automatic pump control
- Low-water cut-out switchgear
Typekey
Example: FWJ-203-EM/3-2 FWJ Domestic water system with WJ pump and FluidControl 2 Rated flow rate Q in m³/h at optimum efficiency 03 Version 3 with higher pressure than version 2; no correlation with number of impellers EM Single-phase 230 V /3 Index of technical development -2 With IE2 motor Technical Data
For Wilo-Jet FWJ:
- Mains connection: 1~230 V, 50 Hz
- Perm. inlet pressure: Max. 1 bar
- Start-up pressure: 1.5 bar
- Switch off volume flow: 95 l/h
- Perm. fluid temperature: +5 °C to +35 °C(+55 °C for 10 min)
- Perm. operating pressure: Max. 6 bar
- Protection class: IP 44
- Pressure-side connection: R1
- Suction-side connection: G1
For the wibutler communication box:
-
- Standard communication/frequency: EnOcean / 868 MHz, Z-Wave / 868 MHz, Zigbee / 2.4 GHz, WLAN / 802.11 b/g/n 2.4 GHz
- Power supply:1~ 100 – 240 V AC / 50-60 Hz
- Plug type: EU plug
- Miscellaneous: Integrated loudspeaker, integrated 8 GB SSD, 1 GB DDR3-RAM, 1 GHz CPU ARMADA 370 ARM v7, 1 x Ethernet-RJ45, 1 x 3.5 mm stereo output
- Manufacturer: iEXERGY
Materials
- Pump housing made of 1.4301 stainless steel
- Impeller made of 1.4301 stainless steel
- Shaft 1.4005 stainless steel
- Mechanical seal made of carbon/ceramic
- Stage chambers made of Noryl
- Pressure monitor housing made of nylon PA6
- Diffuser/injector made of Noryl
- Seal made of NBR
Accessories
- Suction hose set 1
- Shut-off ball cock Rp1
- Foot valve R11/4
- Non-return valve R1
- Downloads
