Wilo-DrainLift SANI CUT-M
Lightweight single-pump lifting system with macerator for residential buildings.
-
Description
The Wilo-DrainLift SANI CUT-M single-pump unit is a compact and lightweight lifting unit according to EN 12050-1 and is therefore ideal for use in residential buildings, both single houses and apartment buildings.
Thanks to its large switching volume and macerator with double shear effect, Wilo-DrainLift SANI CUT-M offers high operational reliability.
With freely selectable inlets and compact physical dimensions, the Wilo-DrainLift SANI CUT-M can be installed flexibly and unobtrusively.
Maintenance is made particularly easy by the user-friendly construction including transparent cover.
-
Advantages
- Very easy to install and to transport due to lightweight and space-saving compact design
- Operational reliability provided by the large switching volume, pump with radial macerator with double shear effect, thermal motor protection and mains-independent alarm
- Optimised hydraulics/macerator combination for a wide coverage of delivery head at the lowest power requirement for domestic electrical installations
- Low overall installation costs thanks to the use of smallest possible piping
- Corrosion-free design with engineering plastics and stainless-steel guarantee high reliability
- Freely selectable connections for maximum installation flexibility
- Transparent tank cover and cleaning opening ensure easy maintenance
-
Technical Features
Design
Ready for connection and fully submersible single-pump lifting unit with macerator hydraulics for pumping sewage containing faeces.
Application
Pumping of sewage containing faeces:
- In cases where sewage cannot be discharged directly into the sewer system via a natural downward slope
- For backflow resistant drainage in cases where the discharge point is below the backflow level
Equipment/function
- Switchgear with mains-independent alarm and collective fault signal
- Ready-to-plug
- Tank with inspection opening and transparent cover
- Analogue level measurement (4 … 20 mA)
- Non-return valve
- Thermal motor monitoring with bimetallic sensor
Typekey
Example: DrainLift SANI CUT-M.20M/1 DrainLift Product family SANI CUT Sewage lifting unit with macerator M Size 20 Max. delivery head M Mains connection: - M = 1~
- T = 3~
1 Motor and switchgear version: - 1 = operating mode: S3, switchgear: Control MS-L
Technical Data
- Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Operating mode: S3 10%
- Fluid temperature: 3 … 40 °C (37 … 104 °F), max. 65 °C (149 °F) for 5 min
- Max. ambient temperature: 3 … 40 °C (37 … 104 °F)
- Tank volume: 64 l (16 US.liq.gal.)
- Max. usable volume in the tank according to the inlet height*: 29 l/7 US.liq.gal. (180 mm*)/39 l/10 US.liq.gal. (250 mm*)/48 l/12 US.liq.gal. (315 mm*)
- Discharge port: DN 32
- Inlet connection: DN 100/150 (110/160 mm)
- Ventilation connection: DN 40 (50 mm)
- Switchgear degree of protection: IP54
- Noise level: 70 dB(A)
Materials
- Motor housing: 1.4404 (AISI 316L)
- Hydraulics: EN-GJL-250 (ASTM A48 Class 35/40B)
- Impeller: EN-GJL-250 (ASTM A48 Class 35/40B)
- Macerator: 1.4528/59 HRC (AISI 440B+Co)
- Tank: PE
- Non-return valve: EN-GJL-250 (ASTM A48 Class 35/40B)
Construction
Gas- and watertight collection tank with sloped floor at an angle and an inspection opening with transparent cover.Freely selectable inlets within the marked areas.Level measurement performed with an analogue output signal 4 … 20 mA.Discharge port with non-return valve attached.
Surface-cooled (air) or self-cooling (sheath flow cooling) motor with thermal motor monitoring.
Pre-installed switchgear for automatic operation:
Wilo-Control MS-L
- Collective fault signal with potential-free contact
- Integrated and mains-independent alarm
- Adjustable follow-up time
- 1.5 m connection cable with attached plug
-
Downloads
Click Below to Download:
Wilo-DrainLift SANI CUT-M
Wilo-Control MS-L
Simply secure in sewage transport
Group Statement REACH
